The terminals supplied in the kit are crimped onto the blue and black motor wires. On the rear doors all 5 wires must be carefully plugged into the blocks following the following the wiring diagram. On the front doors, only the blue and black motor wires are left to connect.
The plastic moisture barriers (plastic liners) are reinstalled on the doors. The wiring is led through the holes by the handles and the door panels are reinstalled on the doors.
Article Pages
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
17 18
19 20
21 22
23 24
25
