Power window regulator kit designed to be used in street rods and older vehicles with flat window glass. This kit includes left and right regulator and motor assemblies with clamp style glass mounts. This kit differs from the EL1000-K in the method of glass mounting. The clamp style mount makes mounting the kit easier than ever. For vheicles with wide glass that may need extra support, we recommend the EL1000-K. The EL1000-K would also be the kit of choice in thin doors with limited space under the glass (requires 1 inch less room under glass). This kit has compact high torque motors which allows installation in slimmer doors while maintaining fast smooth window operation. This kit does not include switches or wiring. Switch kit must be ordered separately.
Minimum Mounting Dimensions: Measure the distance between the glass and the door. A minimum of 1 inch is needed to mount the new regulator. A minimum of 6 inches below the glass (when it is in lowest position) is also necessary for the window to have full travel. A minimum of 1 7/8 inches of door thickness is also necessary to mount the motor in bottom of door.